|本期目录/Table of Contents|

[1]孙铭泽,张大长,李布辉,等.Q420高强钢角焊缝承载力特性试验及模拟分析[J].南京工业大学学报(自然科学版),2014,36(06):99-103.[doi:10.3969/j.issn.1671-7627.2014.06.018]
 SUN Mingze,ZHANG Dachang,LI Buhui,et al.Test and simulation analysis on bearing capacity of Q420 high-strength steel fillet weld[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2014,36(06):99-103.[doi:10.3969/j.issn.1671-7627.2014.06.018]
点击复制

Q420高强钢角焊缝承载力特性试验及模拟分析()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
36
期数:
2014年06期
页码:
99-103
栏目:
出版日期:
2014-11-21

文章信息/Info

Title:
Test and simulation analysis on bearing capacity of Q420 high-strength steel fillet weld
文章编号:
1671-7627(2014)06-0099-05
作者:
孙铭泽1张大长1李布辉2岳健广1
1.南京工业大学 土木工程学院,江苏 南京 211800; 2.河海大学 土木交通工程学院,江苏 南京 210012
Author(s):
SUN Mingze1ZHANG Dachang1LI Buhui2YUE Jianguang1
1.College of Civil Engineering,Nanjing Tech University,Nanjing 211800,China; 2.College of Civil and Transportation Engineering,Hohai University,Nanjing 210012,China
关键词:
角焊缝 Q420高强钢 应力-应变曲线 弹性模量
Keywords:
fillet weld Q420 high-strength steel stress-strain curve elasticity modulus
分类号:
TU392
DOI:
10.3969/j.issn.1671-7627.2014.06.018
文献标志码:
A
摘要:
角焊缝是钢结构及钢管法兰连接的重要连接形式,直接影响法兰安全性。为了研究角焊缝在无劲法兰中受力状态及承载力特性,开展了双盖板正面角焊缝拉伸试验,测定角焊缝的变形特性及不同部位应变的发展规律,分析轴拉受力过程中角焊缝的应力-应变关系,计算确定角焊缝的屈服强度、极限强度和弹性模量。不同规格板厚正面角焊试件的屈服强度与其设计强度比值为1.9,极限强度与其设计强度比值为3.0,角焊缝的弹性模量与钢材基本相同。开展角焊缝试件的非线性有限元模拟,角焊缝荷载-位移曲线分析结果与试验结果吻合较好,且破坏形态与试验一致。研究表明我国《钢结构设计规范》中角焊缝的设计规定是偏于安全的。
Abstract:
Fillet weld was an important connection for the steel structure and the steel flange influencing flange safety.In order to study the stress state and bearing capacity of fillet weld in flexible flange, axial tensile experiments of fillet weld specimens were carried out and deformation behavior and strains development were measured.Then, the stress-strain relationship was analyzed,and the yield strength,ultimate strength and elastic modulus were calculated.Test shown that the ratio between yield strength and design strength of fillet weld specimen was 1.9; the ratio between ultimate strength and design strength was 3.0; and the modulus of both weld and steel were similar.Furthermore,the nonlinear finite element simulation of fillet weld was executed,which led to the results that FEA load-deformation relationship and failure mode agreed well with test results.It can be concluded that the design strength of fillet weld regulation in national steel code GB 50017-2003 was safe.

参考文献/References:

[1] 中华人民共和国建设部.GB 50017—2003钢结构设计规范[S].北京:中国计划出版社,2003.
[2] 中华人民共和国机械工业部.GB/T 5118—1995低合金钢焊条[S].北京:中国质检出版社,1995.
[3] 中华人民共和国建设部.JGJ 81—2002建筑钢结构焊接技术规程[S].北京:中国建筑工业出版社,2002.
[4] 中华人民共和国国家能源局.DL/T5154—2002架空送电线路杆塔结构设计技术规[S].北京:中国电力出版社,2002.
[5] 周卫,何敏娟,马人乐,等.500 kV变电所架构柔性法兰的试验研究[J].电力建设,2004,25(1):24-27.
[6] 薛伟辰,黄永嘉.500 kV吴淞口大跨越塔柔性法兰原型试验研究[J].工业建筑,2004,34(3):68-70.
[7] 曾德伟,郭耀杰,刘汉生,等.Q460钢锻造平焊带颈法兰节点轴心受压性能分析[J].电力建设,2012,33(4):86-88.
[8] 李茂华,侯建国.国内外钢结构设计规范关于角焊缝的限制及计算方法[J].钢结构,2005(1):65-67.

备注/Memo

备注/Memo:
收稿日期:2014-01-24
基金项目:江苏省六大人才高峰基金
作者简介:孙铭泽(1988—),男,江苏盐城人,硕士,主要研究方向为钢结构; 张大长(联系人),教授,E-mail: dczhangchina@163.com..
更新日期/Last Update: 2014-11-20