|本期目录/Table of Contents|

[1]周峰,张鹏,王旭东.吻合度对节理力学特性影响的细观数值试验[J].南京工业大学学报(自然科学版),2015,37(02):85-90.[doi:10.3969/j.issn.1671-7627.2015.02.017]
 ZHOU Feng,ZHANG Peng,WANG Xudong.Influence of matching coefficient on joint mechanics characteristics based on meso-numerical analysis[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2015,37(02):85-90.[doi:10.3969/j.issn.1671-7627.2015.02.017]
点击复制

吻合度对节理力学特性影响的细观数值试验()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
37
期数:
2015年02期
页码:
85-90
栏目:
出版日期:
2015-03-20

文章信息/Info

Title:
Influence of matching coefficient on joint mechanics characteristics based on meso-numerical analysis
文章编号:
1671-7627(2015)02-0085-06
作者:
周峰张鹏王旭东
南京工业大学 交通学院,江苏 南京 210009
Author(s):
ZHOU FengZHANG PengWANG Xudong
College of Transportation Science & Engineering,Nanjing Tech University,Nanjing 210009,China
关键词:
吻合度系数 粗糙度系数 不吻合节理 三维激光扫描仪 细观变形
Keywords:
joint matching coefficient joint roughness coefficient non-matching rock joints three-dimensional laser scanner meso deformation
分类号:
TU45
DOI:
10.3969/j.issn.1671-7627.2015.02.017
文献标志码:
A
摘要:
岩石节理经过侵蚀、风化及工程扰动等影响后,节理面往往会呈现出不吻合特征,现有关于节理力学性质的研究均是基于Barton公式考虑节理粗糙度系数的完全吻合岩石节理,对不吻合节理还未系统深入研究,本文试图从细观力学角度研究吻合度对节理力学性质的影响规律。首先通过RIEGL LMS-Z420i三维激光扫描仪现场采集节理面起伏状态,以采集的起伏状态为骨架,采用分形插值函数构造节理面的细观几何形态,通过上、下节理面的水平错位移动来描述节理的吻合度; 其次,从节理面凸凹点的细观变形出发,提出这些凸凹点集群化后表现出的宏观力学特征及其数值模拟方法,基于此方法,系统地研究吻合度对节理力学性质的影响规律,并通过试验验证该模拟方法的可靠性。研究表明节理的峰值剪切强度与节理粗糙度和吻合度系数的乘积值以及法向作用力成正比。
Abstract:
When erision,weathering or engineering disturbance happened,non-matching characteristics occurred on rock joints.The researches on joint mechanics characteristics were now almost based on Barton formula with the joint roughness coefficient, while the research at non-matching joints is not systematically executed.In this paper,the research on non-matching joints was executed in meso scale.Firstly,three-dimensional laser scanner was used to collect the information of up and down points Then, the geometrical morphology by fractal interpolation function was described in mesoscale based on these points.After that,the macroscopic mechanics characteristics were analyzed by micromechanics.Finally the influences on non-matching joints were researched by numerical methods.Research showed that the peak of joints shear strength is proportional to the result of joint roughness coefficient multiplied by the matching rock joints and is proportional to the normal stress.

参考文献/References:

[1] 赵坚.岩石节理吻合系数及其对节理特性的影响[J].岩石力学与工程学报,1997,16(6):514-521.
[2] 赵坚.岩石节理剪切强度的JRC-JMC模型[J].岩石力学与工程学报,1998,17(4):349-358.
[3] Barton N R.Review of a new shear strength criterion for rock joints[J].Engineering Geology,1973,7:287-332.
[4] Barton N R.The shear strength of rock and rock joints[J].International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts,1976,13:255-279.
[5] Barton N R,Choubey V.The shear strength of rock joints in theory and practice[J].Rock Mech,1977,10:1-54.
[6] 杜时贵,胡晓飞,罗战友,等.节理抗剪强度综合评价的试验研究[J].工程地质学报,2008(1):89-98.
[7] 谢和平,孙洪泉.分形插值曲面理论及其应用[J].应用数学和力学,1998(4):297-306.
[8] 孙洪泉,谢和平.分形插值曲面及其维数定理[J].中国矿业大学学报,1998(2):217-220.
[9] 孙洪泉,谢和平.断层粗糙表面的分形模拟[J].中国矿业大学学报,1999,28(5):433-437.
[10] Tse R,Curden D M.Estimating joint roughness coefficients[J].International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts,1979,16(5):303-317.
[11] 张鹏.裂隙表面几何形态对裂隙介质力学、水力学特性的影响研究规律[D].西安:西安理工大学,2007.
[12] Goodman R E.Methods of geological engineering in discontinuous rock[J].International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts,1976,13(10):115.
[13] Goodman R E.Deformability of joints and its relation to rock foundation settlements[J].Canadian Geotechnical Journal,1978,15(2):239-249.
[14] Zhao J.Joint surface matching and shear strength part B:JRC-JMC shear strength criterion[J].International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts,1997,34(2):179-185.

备注/Memo

备注/Memo:
收稿日期:2014-04-23
基金项目:国家自然科学基金(NSFC41272302); 国家自然科学青年基金(41102178)
作者简介:周峰(1989—),男,江苏盐城人,硕士,主要研究方向为岩石力学及数值计算; 张鹏(联系人),副教授,E-mail: zhangpeng-mail@163.com
引用本文:周峰,张鹏,王旭东.吻合度对节理力学特性影响的细观数值试验[J].南京工业大学学报:自然科学版,2015,37(2):85-90..
更新日期/Last Update: 2015-02-20