|本期目录/Table of Contents|

[1]刘雁,盛向前,缪晓春,等.意杨旋切板胶合木柱的蠕变性能[J].南京工业大学学报(自然科学版),2016,38(05):87-93.[doi:10.3969/j.issn.1671-7627.2016.05.014]
 LIU Yan,SHENG Xiangqian,MIAO Xiaochun,et al.Creep properties of poplar laminated veneer lumber column[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2016,38(05):87-93.[doi:10.3969/j.issn.1671-7627.2016.05.014]
点击复制

意杨旋切板胶合木柱的蠕变性能()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
38
期数:
2016年05期
页码:
87-93
栏目:
出版日期:
2016-09-28

文章信息/Info

Title:
Creep properties of poplar laminated veneer lumber column
文章编号:
1671-7627(2016)05-0087-07
作者:
刘雁1盛向前1缪晓春2宋亚磊1丁佩蓉1
1.扬州大学 建筑科学与工程学院,江苏 扬州 225127; 2.扬州市建筑设计研究院有限公司,江苏 扬州 225009
Author(s):
LIU Yan1SHENG Xiangqian1MIAO Xiaochun2SONG Yalei1DING Peirong1
1.College of Civil Engineering,Yangzhou University,Yangzhou 225127,China; 2.Yangzhou Architectural Design & Research Institute Co. Ltd.,Yangzhou 225009,China
关键词:
意杨旋切板胶合木 蠕变 黏弹性 本构方程
Keywords:
poplar laminated veneer lumber creep viscoelasticity constitutive equations
分类号:
TU366.3
DOI:
10.3969/j.issn.1671-7627.2016.05.014
文献标志码:
A
摘要:
本文对意扬旋切板胶合木柱长期荷载作用下的蠕变性能开展了初步研究工作。试件为3组,尺寸均为150 mm×150 mm×2 400 mm,每组试件所施加的轴心受压荷载值都是根据先前相同尺寸柱短期轴压试验确定的。研究过程中用温湿度记录仪记录试验环境变化; 用位移传感器记录试件中部的变形大小; 运用黏弹性力学理论建立蠕变本构方程; 利用Origin软件结合试验数据对本构方程的系数进行拟合。结果表明:足尺旋切板胶合木柱的蠕变变形由弹性变形、黏性变形和黏弹性变形组成; 湿度和温度对蠕变变形的影响很大; 通过Burger模型、三参量模型和经验模型建立蠕变本构方程,其中Burger模型与三参量模型能够较好地拟合本次试验曲线,而三参量模型所建立的本构方程能够更好地应用于实际工程中。
Abstract:
This paper studies the creep properties of full-scale poplar laminated veneer lumber column under the long term loading.The test specimens were divided into three groups,and all specimens were of the same size,which was 150 mm wide,150 mm high,and 2400 mm long.The axial compressive load of each group was determined by the previous column axial compression test.During the experimental process,the environmental changes were recorded by the temperature and humidity recorders; the deformation of the middle part of the specimen was measured by the displacement sensor; the viscoelastic mechanics theory was used to establish the creep constitutive equations; the coefficients of the equation were fitted by Origin software combined with the test data.The experiment proved that the poplar laminated veneer lumber creep deformation was composed of elastic,viscous,and viscoelastic deformations.The influence of humidity and temperature on creep deformation was much greater.Based on the Burger model,the three parameter model,and the empirical model,the constitutive equation of creep was established. The Burger model and the three parameter model could fit the test curve well,while the constitutive equation established by the three parameter model could be better applied in practical engineering.

参考文献/References:

[1] ARNO P,SCHNIEWIND R.Recent progress in the study of the rheology of wood [J].Wood science and technology,1968,2:188.
[2] ASTM. Annual Book of ASTM Standards 2005[M].Baltimore:[s.n.],2005:730-740.
[3] ARMSTRONG L D,CHRISTENSON G N.Influence of moisture changes on deformation of wood under stress[J].Nature,1961,191(7):869.
[4] GROSSMAN P U A.Requirement for a model that exhibits mechanosorptive behavior[J].Wood science and technology.1976,10:163.
[5] RANTA-MAUNUS A.The viseoelastieity of wood at varying moisture content[J].Wood science and technology,1975,9:189.
[6] ITANIR Y,GRIFFITH M C,HOYLE R J.The effect of creep on long wood column design and performance[J].Journal of structural engineering,1986,112(5):1097.
[7] FRIDLEY K J,TANG R C,SOLTIS L A.Creep behavior model for structural lumber[J].Journal of structural engineering,1992,118(8):2261.
[8] BECKER P,RAUTENSTRAUCH K.Time-dependent material behavior applied to timber columns under combined loading[J].Holz als roh-und werkstoff,2001,59(5):380.
[9] CAI Z Y,KENNETH J F,MICHAEL O H.Creep and creep-recovery models for wood under high stress levels [J].Wood science and technology,2002,34:425.
[10] 张斌,卢宝贤,李静辉.木材弯曲蠕变的试验研究[J].东北林业大学学报,1987,1(5):90.
[11] 刁海林,梁炳钊,徐峰,等.木材蠕变特性常数化研究方法讨论[J].广西科学,2002,9(2):148.
[12] 李大纲.意杨木材弯曲蠕变特性的初步研究[J].四川农业大学学报,1998(1):83.
[13] 虞华强,赵荣军,刘杏娥,等.木材蠕变模拟研究概述[J].林业科学,2007,43(7):101.
[14] 祝恩淳,周华樟.层板胶合木拱的蠕变屈曲[J].沈阳建筑大学学报,2009,25(4):640.
[15] 单亮.旋切板胶合木轴心受压性能研究[D].扬州:扬州大学.2014.
[16] 杨挺青,罗波,徐平,等.黏弹性理论与应用[M].北京:科学出版社,2004.
[17] YUSUKE T,KOSEI A.Time dependence of Poisson’s effect in wood 1:the lateral strain behavior [J].The Japan wood research society,2010.56:100.

相似文献/References:

[1]何敏,陆伟东,岳孔,等.FRP增强胶合木拱的蠕变性能[J].南京工业大学学报(自然科学版),2013,35(02):107.[doi:10.3969/j.issn.1671-7627.2013.02.022]
 HE Min,LU Weidong,YUE Kong,et al.Creep performances of FRP reinforced glulam arch[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2013,35(05):107.[doi:10.3969/j.issn.1671-7627.2013.02.022]
[2]王小威,巩建鸣,郭晓峰,等.超超临界发电厂中P92钢蠕变特性及断裂机制[J].南京工业大学学报(自然科学版),2014,36(03):32.[doi:10.3969/j.issn.1671-7627.2014.03.007]
 WANG Xiaowei,GONG Jianming,GUO Xiaofeng,et al.Creep properties and fracture mechanism of P92 steel used in ultra-supercritical power plant[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2014,36(05):32.[doi:10.3969/j.issn.1671-7627.2014.03.007]
[3]孙幸龙,王新生.疲劳对HK——40炉管蠕变裂纹扩展的影响[J].南京工业大学学报(自然科学版),1987,9(01):81.
 Sun Xinlong Wang Xinsheng.The Influence of Fatigue on Creep Crack Growth in Hk—40 Reformer Tubes[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),1987,9(05):81.
[4]涂善东,巩建鸣.高温下焊接结构的强度设计及寿命评价的研究进展[J].南京工业大学学报(自然科学版),1996,18(02):88.
 Tu Shandong,Gong Jianming(Department of Mechanical Engineering,Nanjing University of Chemical Technology,et al.CREEP STRENGTH AND LIFE ASSESSMENT OF WELDED STRUCTURES AT ELEVATED TEMPERATURE[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),1996,18(05):88.
[5]巩建鸣,涂善东,陈嘉南,等.制氢转化炉炉管长期服役后损伤评价[J].南京工业大学学报(自然科学版),1999,21(01):50.
 Gong Jianming,Tu Shandong,Chen Jianan Department of Mechanical Engineering,et al.DAMAGE ANALYSIS OF REFORMER FURNACE TUBES SERVICED FOR TEN YEARS[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),1999,21(05):50.
[6]丘泰.Al_2O_3-TiN复合物高温蠕变的显微结构及蠕变机理[J].南京工业大学学报(自然科学版),1999,21(02):21.
 Qiu Tai College of Materials Science and Engineering,Nanjing University of Chemical Technology,Nanjing,et al.MICROSTRUCTURE AND CREEP MECHANISM OF Al\-2O\-3TiN COMPOSITES[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),1999,21(05):21.
[7]丘泰.管式致密透氧膜用于甲烷部分氧化制合成气的研究[J].南京工业大学学报(自然科学版),1999,21(02):26.
 Qiu Tai College of Materials Science and Engineering,Nanjing University of Chemical Technology,Nanjing,et al.MICROSTRUCTURE AND CREEP MECHANISM OF Al\-2O\-3TiN COMPOSITES[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),1999,21(05):26.
[8]周昌玉,涂善东.炉管蠕变损伤的随机计算模型[J].南京工业大学学报(自然科学版),1999,21(05):5.
 Zhou Changyu,Tu Shandong College of Mechanical Engineering,Nanjing University of Chemical Technology,et al.A STOCHASTIC CALCULATING MODEL FOR THE CREEP DAMAGE OF FURNACE TUBE[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),1999,21(05):5.

备注/Memo

备注/Memo:
收稿日期:2016-06-21
基金项目:住建部2015年科学技术项目(2015-K2-009)
作者简介:刘雁(1963—),男,江苏扬州人,教授,博士,主要研究方向为钢木结构,E-mail:liuyan@yzu.edu.cn.
引用本文:刘雁,盛向前,缪晓春,等.意杨旋切板胶合木柱的蠕变性能[J].南京工业大学学报(自然科学版),2016,38(5):87-93..
更新日期/Last Update: 2016-09-20