|本期目录/Table of Contents|

[1]董梦袁,申杰,刘公平,等.管式聚二甲基硅氧烷/陶瓷复合内膜的制备及其渗透汽化应用[J].南京工业大学学报(自然科学版),2017,39(03):34-39.[doi:10.3969/j.issn.1671-7627.2017.03.007]
 DONG Mengyuan,SHEN Jie,LIU Gongping,et al.Preparation and application of tube polydimethylsiloxane/ceramic inner composite membrane for pervaporation[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2017,39(03):34-39.[doi:10.3969/j.issn.1671-7627.2017.03.007]
点击复制

管式聚二甲基硅氧烷/陶瓷复合内膜的制备及其渗透汽化应用()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
39
期数:
2017年03期
页码:
34-39
栏目:
出版日期:
2017-05-20

文章信息/Info

Title:
Preparation and application of tube polydimethylsiloxane/ceramic inner composite membrane for pervaporation
文章编号:
1671-7627(2017)03-0034-06
作者:
董梦袁申杰刘公平金万勤
南京工业大学 化工学院 材料化学工程国家重点实验室,江苏 南京 210009
Author(s):
DONG Mengyuan SHEN Jie LIU Gongping JIN Wanqin
State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering,Nanjing Tech University,Nanjing 210009,China
关键词:
管式PDMS/陶瓷复合内膜 浸渍-提拉法 渗透汽化
Keywords:
tube PDMS/ceramic inner composite membrane dip-coating method pervaporation
分类号:
TQ028.8
DOI:
10.3969/j.issn.1671-7627.2017.03.007
文献标志码:
A
摘要:
采用浸渍-提拉法在多孔管式陶瓷支撑体内表面制备完整无缺陷的聚二甲基硅氧烷(PDMS)膜层。采用扫描电子显微镜(SEM)、渗透汽化(PV)性能测试等手段,研究支撑体孔径和涂膜时间对管式PDMS/陶瓷复合内膜的形貌和分离性能的影响。同时,考察丁醇-水体系中料液温度、料液中丁醇含量对管式PDMS/陶瓷复合内膜渗透汽化性能的影响,并对膜的渗透汽化长期稳定性进行了研究,将复合内膜的渗透汽化性能与复合外膜进行了比较。结果表明:复合膜均匀完整,有良好的过渡层。支撑体孔径较大的复合膜,其渗透通量更高。随涂膜时间的延长,膜厚依次增加,渗透通量下降,分离因子升高; 随料液中丁醇含量增加,通量逐渐上升,分离因子先升高后下降; 随操作温度的升高,通量和分离因子都有所增加。在料液温度为40 ℃、丁醇质量分数为1.5%的条件下连续运行180 h,膜渗透总通量高达1 050 g/(m2·h),选择性可达30。
Abstract:
Polydimethylsiloxane(PDMS)membrane was dip-coated in the inner surface of the tubular ceramic support. Scanning electron microscope(SEM)and pervaporation(PV)tests were utilized to investigate the effects of pore size of the ceramic support and coating time on the membrane morphology as well as the pervaporation separation performance. The operation parameters such as feed temperature and the feed concentration were investigated. Result showed that the composite membrane was complete uniform, and had a good transition. The composite membrane with larger pore diameters had higher permeation flux. With the coating time extending, the flux decreased and the separation factor increased. With the increase of alcohol content, the flux increased gradually and the separation factor decreased after increasing firstly. With the increase of operating temperature, the flux and separation factor increased. At temperature of 40 ℃, the as-prepared PDMS/ceramic composite membrane showed high separation performance with total flux of 1 050 g/(m2·h)and separation factor of 30, and the membrane was stable during 180 h long-term operation tests.

参考文献/References:

[1] SHAO P,HUANG R Y M.Polymeric membrane pervaporation
[J].Journal of membrane science,2007,287(2):162.
[2] LIU G,HOU D,WEI W,et al.Pervaporation separation of butanol-water mixtures using polydimethylsiloxane/ceramic composite membrane[J].Chinese journal of chemical engineering,2011,19(1):40.
[3] 周浩力,苏仪,万印华.全硅沸石/聚二甲基硅氧烷渗透汽化膜制备及分离性能[J].化学工程,2011,39(3):46.
[4] MISHIMA S,NAKAGAWA T.The behavior of solute organic compounds and water in poly(dimethylsiloxane)[J].Journal of applied polymer science,2000,78(6):1304.
[5] PARK H B,LEE Y M.Separation of toluene/nitrogen through segmented polyurethane and polyurethane urea membranes with different soft segments[J].Journal of membrane science,2002,197(1):283.
[6] LIU S,TEO W K,TAN X,et al.Preparation of PDMSvi-Al2O3 composite hollow fibre membranes for VOC recovery from waste gas streams[J].Separation and purification technology,2005,46(1/2):110.
[7] GUO J,ZHANG G,WU W,et al.Dynamically formed inner skin hollow fiber polydimethylsiloxane/polysulfone composite membrane for alcohol permselective pervaporation[J].Chemical engineering journal,2010,158(3):558.
[8] XIANGLI F,CHEN Y,JIN W,et al.Polydimethylsiloxane(PDMS)/ceramic composite membrane with high flux for pervaporation of ethanol-water mixtures[J].Industrial & engineering chemistry research,2007,46(7):2224.
[9] DONG Z,LIU G,LIU S,et al.High performance ceramic hollow fiber supported PDMS composite pervaporation membrane for bio-butanol recovery[J].Journal of membrane science,2014,450:38.
[10] 杭颖婷,李宇开,刘公平,等.支撑体结构对聚二甲基硅氧烷复合膜界面结合行为的影响[J].南京工业大学学报(自然科学版),2016,38(2):70.

备注/Memo

备注/Memo:
收稿日期:2016-03-30
基金项目:教育部创新团队发展计划(IRT13070); 国家自然科学基金(21406107)
作者简介:董梦袁(1989—),女,河北唐山人,硕士,主要研究方向为渗透汽化; 金万勤(联系人),教授,E-mail:wqjin@njtech.edu.cn.
引用本文:董梦袁,申杰,刘公平,等.管式聚二甲基硅氧烷/陶瓷复合内膜的制备及其渗透汽化应用[J].南京工业大学学报(自然科学版),2017,39(3):34-39..
更新日期/Last Update: 2017-05-31